transmission trouble on a fr 140 fiat allis loader

[junkman33]

tries to pull in reverse trans pressure gauge reads normal check all filter and the sump screen and the diodes

 

[FTV]

Hi,

Not quite shure what you mean. Does it keep moving in reverse while in neutral? Or does it not move in reverse at all?

Regards

 

[junkman33]

it tries to pull in reverse it has neutral

 

[FTV]

This troubleshooting guide: https://centranz.com/troubleshooting/ states warped discs and plates in the transmission as a possible reason for creeping in neutral. That's the best answer i can give you unfortunately. But there may be others on this forum with more knowledge on these transmissions.

 

[Bigbert]

Does it lock in forward? At least at low engine speed?
Colour of oil? Smells burnt?
What type of transmission fitted?

 

[junkman33]

oilis good not burned it tries to go in reverse does not move or creep back in neutral i set it up for a few years and this when the no situation came about

 

[junkman33]

we got it to pull strong in reverse still no forward gear

 

[Bigbert]

What type and brand of transmission?

 

[junkman33]

clark 4 speed

 

[Bigbert]

Junkman, I'm definitely not a Clark expert, so no further assistance from my side given. Hope, the forum friends are able to give support.