Threaded guide

[Mike Cattarin]

I have a 1977 John Deere 410D. I'm in need of a threaded guide or bushing for the dipper cylinder. A used one would be great, if possible. I'm having a difficult time tyring to locate one. Any leads would be greatly appreciated. Thanks

 

[Tinkerer]

Welcome to HEF, Mike !
Your description is a little vague.
More details are needed.
Pin bushing problems or getting the gland back in the cylinder ?

 

[heymccall]

These are from 410D, but, 1977 isn't a D IIRC. My 1993 410D has 794991 serial number.

410C matches the above, also.

 

[heymccall]

410B

 

[Tinkerer]

Bbbut, Mike is working on the dipper cylinder.
We just need to know which part of it is he is putting back together or replacing.

 

[1466IH]

Are you talking about the rod guide?

 

[joe--h]

Same thing as this ? --> https://www.heavyequipmentforums.com/threads/cracked-cylinder-rod-guide-jd-310se-loader-tilt.96373/

Joe H

 

[heymccall]

Bbbut, Mike is working on the dipper cylinder.
We just need to know which part of it is he is putting back together or replacing.

Which one is a "dipper" cylinder?

I know boom, arm or stick, extendahoe, and bucket.
And, to make it easier, how about a serial number, just because.

 

[Tinkerer]

Yes, a serial number will certainly get more accurate help.
Dipper and crowd are the only two words I have ever heard or used for the attachment pined to the boom of a backhoe. So, the cylinder for it would carry the same name.
The arrow is pointing on the dipper cylinder.