I have always had the shop check my levels, but I am bravely trying to do more of my own service work now. Today after changing the engine oil and filters and checking the rear end gear oil the next on my list was to check the oil levels in the winch and slew drive winch was no problem I drained it and filled with new gear oil next was the slew drive the book says it's a Tulsa 5200 or 6000 but the drain plug and level plug are not where they say they should be in fact I can't find a plug at all except within a couple inches of the bottom. Don't want to screw this up can I get some of that good advice you all are famous for.
Thanks in advance.
Tradesman
Thanks in advance.
Tradesman