• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Some pics from work.

MitchSA

Well-Known Member
Joined
Jul 28, 2010
Messages
130
Location
Western Australia
IMG_0283.JPGIMG_0307.JPG

One of our road trains, they are 70m long. Its a Kenworth C540, they run a QSK19 up front with a allison auto and double hub reduction diffs. The 3rd trailer down is a powered trailer, it runs a signature with an allison and tri drive sisu hub reduction diffs.

Below I'm doing a engine/tranny change out on the trailer.

IMG_0291.JPGIMG_0292.JPG


The bin has to be thrown over to get the motor out.



We run a few of these, although ours are not this new and clean :D They are technically underground trucks, they run a DD Series 60 with allison auto's and sisu axle's in both the truck and powertrailer.

th_Underground.jpg
 
Last edited:

MitchSA

Well-Known Member
Joined
Jul 28, 2010
Messages
130
Location
Western Australia
This is one of our smaller rigs, its a 904 Kenworth with a signature and 18speed roadranger and tri drive. It pulls 4 trailers and two are powered by signatures,allison auto and meritor/volvo diffs. It comes out of quite a pit/incline so needs the power :cool:

IMG_0233.JPGIMG_0252.JPG
 

RocksnRoses

Senior Member
Joined
Jun 14, 2008
Messages
770
Location
South Australia
Occupation
Owner operater crushing & contracting business
Good photos Mitch, how many hours do you get out of the Signatures in the trailers, before you change them out?

RnR.
 
Top