• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

S220 bobcat

C

conawaylk

Member
Joined
Oct 2, 2018
Messages
21
Location
Kansas
I have both tilt cylinders that I’m rebuilding. The first cylinder no problem. I can not remove the end cap off cylinder I have tried spanner wrench, pipe wrench, air chisel, I put the cylinder in the freezer thinking it would help the aluminum and I tried pipe wrench with six foot cheater pipe. Any help from anyone. Please.
 
F

frg

Active Member
Joined
Jul 30, 2013
Messages
31
Location
tehran
conawaylk said:
I have both tilt cylinders that I’m rebuilding. The first cylinder no problem. I can not remove the end cap off cylinder I have tried spanner wrench, pipe wrench, air chisel, I put the cylinder in the freezer thinking it would help the aluminum and I tried pipe wrench with six foot cheater pipe. Any help from anyone. Please.
Click to expand...

sorry guys, must grind the cyinder head, and put a new one.
 
You must log in or register to reply here.
Top