Problem with hydraulikk/ electronikk on my Fermac 965/2000mod.

[Tinkerer]

Welcome to HEF, Morten !
Petter has not been on HEF since 2015.
You could try sending him a PM (private message). It will create an email that is automatically sent to him by HEF.
It tells him he has a message to be read.

 

[Luk2011]

So at least. I found the tool in Germany, its no on my way. 995 euro+tax. I`ll had a quick look on the communication card ounder machine. It look like brand new. I`ll give more feedback when I have got my tool. ¨
Thank you for Your help. When I got the tool I understand that my Hydraulic masterbord was ****t!.
So, after replacement the machine is like brad new.

Mvh Petter Ellingsen

What tool have you buy it from Germany ?

@ellingsen how can i contact you ? I have the same problem by Fermec 960 .

 

[Luk2011]

Welcome to HEF, Morten !
Petter has not been on HEF since 2015.
You could try sending him a PM (private message). It will create an email that is automatically sent to him by HEF.
It tells him he has a message to be read.

@Tinkerer can you help me also to contact Peter Ellingsen ? I've write him a Private Message , but he doesn't see it , because have not been here in this forum from year 2015 .

Please help me somehow to contact Peter Ellingsen through email .

thank you

Luk

 

[Tinkerer]

Hi Luk,
Unfortunately I do not have any way to contact him.
Hopefully he is alive and well. But, things do happen that we lose the ability to contact with members.
There is a Peter Ellingsen in Norway that has a Facebook page.
Try contacting Morten Lorentzen with a phone call or a Private Message. He might be able to help you.
Have you tried getting any help from a local Fermec dealer ??

 

[Luk2011]

Hi Luk,
Unfortunately I do not have any way to contact him.
Hopefully he is alive and well. But, things do happen that we lose the ability to contact with members.
There is a Peter Ellingsen in Norway that has a Facebook page.
Try contacting Morten Lorentzen with a phone call or a Private Message. He might be able to help you.
Have you tried getting any help from a local Fermec dealer ??

I've called already Morten Lorentzen , and i'm in contact with him . I've told him to let me know if he will find Petter .

We have try it to contact someone who repair digging machines , but until now it's without succes .

And i wish to talk with Petter to ask him more details about Fermec digging machine .

 

[Luk2011]

The problem it's that are too many : Petter Ellingsen in Facebook , from Norway , and i don't know which of them are Petter Ellingsen from this forum .

 

[Luk2011]

@andershaaby was the previous owner of Petter Ellingsen Fermec digging machine .

How can we contact @andershaaby , to tell us wich of Petter Ellingsen from Facebook , are the right one which are the owner of Fermec digging machine ?

https://www.heavyequipmentforums.com/threads/hydraulic-electric-problem-fermec-965-2000-mod.24262/

https://www.heavyequipmentforums.co...k-electronikk-on-my-fermac-965-2000mod.50601/

SMFA44TC5Y9EE2390

andershaaby

I was member from today. I am the new owner of these Fermec 965/2000mod. I haven't even got it in my yard, but I know there is problem with the hydraulic. Have any of you find the problem with these particular problem what was written before.

Best r Petter Ellingsen

https://www.heavyequipmentforums.co...roblem-fermec-965-2000-mod.24262/#post-557226

 

[Tinkerer]

Don't be bashful.
Send a Facebook message to each of the Petter Ellingsen's from Norway one at a time and explain your dilemma.
Eventually he may reply to you.
Most people on Facebook are very friendly and helpful.
This is most likely Andes Habby you are looking for. https://www.facebook.com/ln.yzz.16
----->

 

[Luk2011]

Anders Haaby Mann, født 1978, 1894 Rakkestad
https://www.proff.no/rolle/anders-haaby/rakkestad/8902/
https://www.facebook.com/RakkestadAvis/posts/1040260449320776/
=======
I'm just a farmer from Norway , not an english teather
https://www.heavyequipmentforums.co...roblem-fermec-965-2000-mod.24262/#post-306061
=======
@andershaaby
Hello.
Im from Norway , have a small buisiness and im very bad in english In my freetime i fly paraglider and have a boat i youse sommertime... exuice my bad english, my teather said that i succed..
I found this forum when i google "fermec 965 + hydraulic problems"
I can't post any new thread yet but i hope administrator fix it.
Very nice forum.

https://www.heavyequipmentforums.com/threads/how-did-you-find-us.559/page-37#post-304333

 

[Tinkerer]

Unfortunately, Anders hasn't been on this forum since August 2011.
That was not long after he became a member on HEF.

 

[Luk2011]

Unfortunately, Anders hasn't been on this forum since August 2011.
That was not long after he became a member on HEF.

Hobøl, Østfold from where it's Morten Lorentzen until Rakkestad from where it's Anders Haaby are 36km , and Rakkestad have 8000 people population .

How many Anders Haaby can be in a locality with 8000 people , to have a small bussines and to be a farmer ?

 

[Tinkerer]

Hobøl, Østfold from where it's Morten Lorentzen until Rakkestad from where it's Anders Haaby are 36km , and Rakkestad have 8000 people population .

How many Anders Haaby can be in a locality with 8000 people , to have a small business and to be a farmer ?

Not many he shouldn't be too difficult to find.
You could try to contact anyone that lives there with the same last.
You might be lucky and it would be a relative.

 

[Xr3]

I have the same problem with fermec 965.
Anyone got conntact whit Petter Ellingsen?
Which tool he used to diagnose the problem?

 

[arcticafrican]

Hello, have any of you been able to sort this problem? My hydraulics are very shaky.
Sometimes they dont work at all. It seems to happen mostly when the machine warms up, about 30 min - 1hr of running then it starts and gets really bad. In the video you can see how it is.
https://youtube.com/shorts/SmBSIod6S_4?feature=share