ColdBlackWind
Well-Known Member
Working on another problem child. I have a zero turn with a 28hp “Cat” 3 cyl. It’s actually a Perkins. I am having trouble finding anything on it online. It began to surge. I suspected fuel filters so I replaced the cartridge filter and cleaned the pre-filter/screen. It was filthy and I thought Ah Hah! Had to be it. Now I can’t get the little bugger primed. I have fuel stream at the lift pump and cartridge filter housing is full. I can’t get anything at the injectors. Maybe a spit of fuel every now and then. I can’t find a bleed fitting in the high pressure pump. Suggestions or directions? Still working on it and headed back toward fuel lines and tanks