• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Power Bobtach Correct operation?

M

Matt M

Member
Joined
Dec 18, 2019
Messages
6
Location
BC
Hey guys, This is my first machine with a Power Bobtach, It doesnt seem to be operating normally though. Its a 2003 T200.

If i just press the button, sometimes 1 arm starts to come up, sometimes nothing. In order to make it work i have to apply very slight pressure to one of the pedals, as soon as i do this they operate as id expect. Is this normal? If not any suggestions where to start resolving this issue?
 
D

dozr

Senior Member
Joined
Dec 15, 2013
Messages
272
Location
alabama
Occupation
excaving
more than likely you need to lube the pins that go in to bucked and levers, if i dont oil mine dont work good . learned this on a manul and you may be a little out of line,
 
You must log in or register to reply here.
Top