Replace 2 windows. We had upright in about 15 minutes. Let it sit for about 30 minutes and fired it up and went back to work.
Maybe a little more NWBC (Telegraph Creek/Dease Lake) than most but here I am with my Yanmar Vio 35-3I was looking forward to this thread 'taking off' so to speak with the popularity of mini ex's. Seems rather slow. Come on guys and gals lets get them pics rolling in.
We have all the above. Its actually my dads and uncles shop. I basically grew up in there if I wasn't in school I was there. Now its at the day job or there. The day job always is getting in way of the important work.Tyler...love your shop! Trying to get mine built so I can put in mill, lathe, surface grinder etc.
My ole beater machine getting a little dirty. View attachment 251139
Can't see through my floor at all with rubber mat lifted up so it is sealed up good. Removed the a/c filter at the 200 hr service and no problems there. Filter was not very dirty at all.Couple questions if you will.
On the -4 machines you can see the ground past the rubber floor Mats around the track controls, basically its not a sealed cab. Did they address this in the -5 cabs? The cabin filters are a joke on the -4’s, I actually retrofitted the svl cabin filter and sealed the intake on my 040-4. Did they upgrade cabin filtration? Thanks.