1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

payloader tricks

Discussion in 'Wheel Loaders' started by John DiMartino, Nov 25, 2007.

  1. John DiMartino

    John DiMartino Super Moderator

    Joined:
    Oct 30, 2003
    Messages:
    94
    Occupation:
    Greenskeeper/mechanic
    Location:
    Walden, NY
  2. jamesbrokman

    jamesbrokman Member

    Joined:
    Dec 4, 2007
    Messages:
    8
    Location:
    council bluffs iowa
    sweet, dont try that at home
     
  3. Jperry

    Jperry Member

    Joined:
    Dec 5, 2007
    Messages:
    9
    Location:
    Florida
    That can't be good on that back axle
     
  4. JBE

    JBE Member

    Joined:
    Jan 1, 2008
    Messages:
    6
    Location:
    Denmark
    Looks funny
     
  5. littlepiston

    littlepiston Member

    Joined:
    Jan 14, 2008
    Messages:
    6
    Location:
    carlsbad NM
    Hmmmmmmmmm!
     
  6. RollOver Pete

    RollOver Pete Senior Member

    Joined:
    Mar 5, 2007
    Messages:
    1,551
    Occupation:
    Operating Engineer/mechanic
    Location:
    Indio, Ca
    That might be a trick at a carnival
    but on a job it could and should get you fired.
    :cool:
     

    Attached Files:

  7. JDOFMEMI

    JDOFMEMI Senior Member

    Joined:
    Jan 3, 2007
    Messages:
    3,074
    Location:
    SoCal
    Pete

    I have seen the first two pics and stories before, but what happened to the Volvo in the third one? It looks a little like the hold of a ship?? Must have been some fall to break like that.
     
  8. RollOver Pete

    RollOver Pete Senior Member

    Joined:
    Mar 5, 2007
    Messages:
    1,551
    Occupation:
    Operating Engineer/mechanic
    Location:
    Indio, Ca
    Looks like someone might have backed up a little too far?
    Or maybe it was droped by a crane?
    :cool:
     
  9. PETE379

    PETE379 Well-Known Member

    Joined:
    Jan 10, 2008
    Messages:
    138
    Occupation:
    Manage and oversee daily operations, also process
    Location:
    Long Island, New York
    What is the story on the first two?
     
  10. Mtxz453

    Mtxz453 New Member

    Joined:
    Feb 5, 2008
    Messages:
    3
    Occupation:
    Contractor
    Location:
    Clifton, NJ
    freestyle payloading! should be in the x-games.
     
  11. stumpjumper83

    stumpjumper83 Senior Member

    Joined:
    Jan 13, 2007
    Messages:
    1,961
    Occupation:
    Movin dirt
    Location:
    Port Allegany, pa
    reasons why you should carry your load low, and keep your bucket low when your not carring anything....
     
  12. mark2601

    mark2601 Member

    Joined:
    Mar 6, 2008
    Messages:
    6
    Location:
    wisconsin
    nice....
     
  13. NoRespect

    NoRespect Member

    Joined:
    Mar 4, 2008
    Messages:
    6
    Location:
    SE
    Looks like the Volvo fell in a barge.