1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Nissan Kizai Model HL-035

Discussion in 'Compact Wheel Loaders' started by Howard J, Aug 21, 2016.

  1. Howard J

    Howard J New Member

    Joined:
    Aug 21, 2016
    Messages:
    1
    Location:
    South Africa
    Hi
    I'm new to the forum and looking for info on the following:-

    In a job lot purchase there was a little Loader Back Actor with the following info on the name plate Nissan Kizai Model HL-035.
    Serial Number 300506
    Engine Number 865062 ( Isuzu 2AB-1) Diesel engine.
    The machine is running and all hydraulics are working after replacing the pump.
    I've been in touch with Nissan/Hanix Europe and they said it wasn't made in the UK
    All the name plates are in English and Japanese especially the operation of the functions.

    Can anybody throw any light in this as to where it was made, how old it is Etc.

    Howard
     
  2. lantraxco

    lantraxco Senior Member

    Joined:
    Jan 1, 2009
    Messages:
    6,684
    Location:
    Elsewhen
    I saw one here in the US back in the early 80's, actually drove it out of the container along with some N45's or N41's.

    Made in Japan before Nissan morphed into Hanix. Sturdy little machine as I recall, as long as you can find parts for the engine and make parts for the rest it should be a good worker.