1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

New Terex TS24D

Discussion in 'Scrapers' started by Questionable wizard, Apr 2, 2021.

  1. Questionable wizard

    Questionable wizard Well-Known Member

    Joined:
    Feb 10, 2018
    Messages:
    104
    Location:
    Ohio
    traxcavator and DB2 like this.
  2. Bluox

    Bluox Senior Member

    Joined:
    Jun 20, 2010
    Messages:
    1,441
    Location:
    WA state
    Look a little closer, the router bits are wore out both sides and the cutting edges are broke.
    Looks like a bunch of welds on the hitch are redone.
    Bob
     
    DB2 likes this.
  3. Questionable wizard

    Questionable wizard Well-Known Member

    Joined:
    Feb 10, 2018
    Messages:
    104
    Location:
    Ohio
    I had seen the broken cutting edge, slight scratches on the tire tread face. Still very low hours.
     
  4. 56wrench

    56wrench Senior Member

    Joined:
    Dec 4, 2016
    Messages:
    995
    Location:
    alberta
    i wonder if it was a demo unit?
     
  5. Bluox

    Bluox Senior Member

    Joined:
    Jun 20, 2010
    Messages:
    1,441
    Location:
    WA state
    It's a Ritchie overhaul with new tires.
    Bob
     
  6. 56wrench

    56wrench Senior Member

    Joined:
    Dec 4, 2016
    Messages:
    995
    Location:
    alberta
    probably. it looks like one of their better overhauls
     
  7. Tinkerer

    Tinkerer Senior Member

    Joined:
    May 21, 2009
    Messages:
    6,929
    Location:
    The shore of the illinois river USA
    The draft arm looks like was replaced. dafft.jpg
     
    DB2 likes this.
  8. catman13

    catman13 Senior Member

    Joined:
    Aug 22, 2011
    Messages:
    390
    Occupation:
    refrigeration engineer/excavation contractor
    Location:
    oregon usa
    it like a low hour machine, the bush blocks and the bail and hook dont show signs of much wear and the pedals dont show much wear
     
  9. traxcavator

    traxcavator Active Member

    Joined:
    Feb 22, 2014
    Messages:
    26
    Location:
    NC
    I don’t think it’s a Ritchie overhaul, looks to be very low hours, I would bet less than 500. I’ve only ever seen two or three 24Ds on the internet, I would like to know how many were built. It will be interesting to see what it brings, hopefully whoever gets it will take care of it.

    I think the 24B, C, & D were a really good design and I have never understood why Terex didn’t build the TS-14s using a similar design, especially the suspension axle. I think they would still be in the scraper business today had they done that.
     
    nicky 68a likes this.
  10. Questionable wizard

    Questionable wizard Well-Known Member

    Joined:
    Feb 10, 2018
    Messages:
    104
    Location:
    Ohio
    I agree with a suspended front axle. I also wish they would have incorporated the push out ejector on the 14s. Wet material likes to stick in the roll out ejector. Then you have to spend time with an excavator digging them out. Not sure if you could hold a poly truck bed liner in the roll out ejector.
     
  11. stars&bars44

    stars&bars44 Well-Known Member

    Joined:
    Jun 3, 2015
    Messages:
    138
    Occupation:
    Earthmoving
    Location:
    Trinity NC
    I've seen a few items come from that area. Someone has a hobby of fixing up old equipment and making it look new. I've seen a few tractors and scrapers come out of there at the auction. I do like this scraper and would love to have it. Last I saw it was at 42k.
     
    traxcavator likes this.
  12. traxcavator

    traxcavator Active Member

    Joined:
    Feb 22, 2014
    Messages:
    26
    Location:
    NC
    I never had much trouble with it sticking to the ejector (at least not a significant amount) but I believe I did see some 14Bs for sale a few years ago that had some type of liner on the ejector and I thought it was a good idea. I think I have also seen a couple that had the ejector heated off of the rear exhaust.

    The push out ejection would have made the 14s easier to dump and control the spread. If you are working in sticky clay soils with the units that have cable aprons, the cable needed to be short enough that you could get the apron up high so the load didn’t hang up on the lower lip of the apron. You also had to be careful not to eject all at once, you had to raise the ejector in small increments (sometimes rocking it up and down) until the higher part of the load fell off the top. I have seen many people get frustrated and abuse these machines because they didn’t know how to dump it. The ts-18s had roll out ejection also, but it had the apron like the 24s and 14Gs, the heavy clays didn’t hang up as long you got the apron opened up high enough. I never used any 14Gs in wet clay so I’m not sure if they performed similar to the 18s or not.
     
  13. Questionable wizard

    Questionable wizard Well-Known Member

    Joined:
    Feb 10, 2018
    Messages:
    104
    Location:
    Ohio
    The 14Gs are kind of a like the Bs and Cs that you would raise the ejector and the wet clump would stick until the ejector was high enough. Then it would roll forward and pack against the cutting edge sliding on the ground. Raise the cutting edge higher and you could get it to shear off or roll under in ugly chunks.
     
  14. traxcavator

    traxcavator Active Member

    Joined:
    Feb 22, 2014
    Messages:
    26
    Location:
    NC
    It brought more than I thought it would. I wonder where it’s new home is going to be? 56A71216-72A7-475D-A4F0-20CCE5B46B8F.png
     
    nicky 68a likes this.
  15. Sjaak Bos

    Sjaak Bos New Member

    Joined:
    Jun 13, 2021
    Messages:
    1
    Location:
    Netherlands
    Hello is there somebody who knows what transmission models has been used in the Terex TTS 14 - Twin Bowl Scraper?
    Regards
    Sjaak Bos
     
  16. traxcavator

    traxcavator Active Member

    Joined:
    Feb 22, 2014
    Messages:
    26
    Location:
    NC
    Someone correct me if I’m wrong, but I think the TTS-14 used Allison CLT 3461 just like the standard TS-14.