some1had2doit
Member
Hey folks. Once again, thanks for the wealth of info here! Such a blessing. I am rebuilding this tilt cylinder and am confused on what seals to get. I was told that the blade was not original to the machine, so I cannot go off of dozer serial number. The only complete number I can find on the cylinder is on the housing the holds the wipe seals in place. The number appears to be a faint "A" followed by 8J334. The rod OD is 3" and the seal housing ID is 3.75". The seals appear to be a chevron stack with no numbers on them. I have never rebuilt one of these, so I am uncertain where to get just the wipe seals/chevron stack, and what part numbers I am looking for. Any help is appreciated!
Yeah, I know the rod has some galling on it...
Yeah, I know the rod has some galling on it...