• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Need help Jlg G9-43a wont go in 3rd or 4th gear

B

bobcats300

Member
Joined
Oct 6, 2013
Messages
8
Location
north carolina
Occupation
equipment foreman/mechanic
we bought a jlg G9-43A telehandler at an auction and when we drive it it wont go into third or fourth gear. when i switch it to third or fourth you can feel it kick in and the driveshafts turn a bit and thats it it wont drive in third or fourth. i found what i think is the solenoids. how would i test them? and what order are they in? thanks for any help you can offer
 
M

Moonlite

Senior Member
Joined
Nov 11, 2013
Messages
517
Location
Texas
Not sure of coil order jlg manuals are available online. So you can get proper location. Then you will need to check for power and ground at coils when put in each gear. You may be able to swap coils fem 1st or 2nd gear .
 
You must log in or register to reply here.
Top