Greetings All, Working on a Murphy model 21 diesel. Need an injector removal wrench. Tee handle style with approx. 5/8 diameter gear that fits in a well in the cylinder head to unthread the injector. Any out there?? Please Help. Thanx!
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Murphy Diesel Injector Wrench
- Thread starter Greg M
- Start date
-
- Tags
- murphy diesel
excavator
Senior Member
The last time I worked on a Murphy was well over 10 years ago, back then there was a place in Florida who would rent out the wrench but they are now out of business. If I remember correctly a 5/8" splined shaft from a hydraulic pump is very close to being the same, I compared the two when I had the wrench. You should be able to look down along side the injector and count the splines if they're the same you can build your own wrench.
skyking1
Senior Member
The Operating Engineer's school outside of Ellensburg is still running a Murphy on a jaw crusher, they *might* have one somewhere.
Coaldust
Senior Member
- Joined
- May 9, 2011
- Messages
- 3,354
- Location
- North of the 60
- Occupation
- Cargo Tanks, ULSD, RUG, Methanol, LPG
Toolslinger
Active Member
These folks advertise parts and restoration on Murphys... Might be worth a call...
https://www.gerhartmachinery.com/engine-repair.htm
https://www.gerhartmachinery.com/engine-repair.htm