1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Milling Video

Discussion in 'Mills' started by milling_drum, Mar 12, 2009.

  1. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately
  2. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately
  3. fireman050

    fireman050 Senior Member

    Joined:
    Aug 7, 2007
    Messages:
    286
    Occupation:
    construction & volunteer firefighter
    Location:
    jackson
    i got a few short vids i need to upload that were take when crews installed speed bumps on my street
     
  4. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately
    That might be better suited to the paving forum?

    But its all good over here:)
     
  5. CAT_D-8N

    CAT_D-8N Active Member

    Joined:
    Mar 30, 2009
    Messages:
    29
    Occupation:
    genral operator
    Location:
    torrington ct
    the 2nd vid is of garity paveing and reclameing a company from ct that i may be getting hierd from this summer
     
  6. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately
    Garrity are a good bunch...
     
  7. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately