davecampbell
Senior Member
I bought a manual for my machine, but can't find torque values for rods and mains.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Komatsu pc200-5 rebuild time due to excessive blowby
- Thread starter davecampbell
- Start date
davecampbell
Senior Member
I put a kit in my turbo when I rebuilt the motor. I'm not sure if i did something wrong or got a bad part, but are acts like the seal went on the turbo tonight. I've got less than 100 hrs since I did it. I think I'll try to find a whole turbo I can bolt on.
Ambientmech
New Member
yep have the exact same machine.side of the block says mad in Japan instead of made in Japan.
the engine plate was on top rocker/tappet cover. got lost between rebuild. komatsu had the engine numbers linked to the serial no though which was handy.
the engine plate was on top rocker/tappet cover. got lost between rebuild. komatsu had the engine numbers linked to the serial no though which was handy.