-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
John Deere 690elc aux spool valve
- Thread starter Babsfarms
- Start date
Diesel Dave
Senior Member
I am thinking the aux valve to run a cylinder would be AT152139 .
Hey there thanks for the reply
I already have the valve with the aux spool but the one I have in it is for a hammer just one way, we put another valve on there to run the thumb but when you hit button the thumb doesn’t stop moving, so all I am looking for is the spool inside the valve
I already have the valve with the aux spool but the one I have in it is for a hammer just one way, we put another valve on there to run the thumb but when you hit button the thumb doesn’t stop moving, so all I am looking for is the spool inside the valve
Diesel Dave
Senior Member
Sounds like you have done some investigation, but I would be very suspect that the original part number AT-156887 you mentioned above includes the spool.
Manufacturers such as Linde would fit a spool to a specific bore under very close tolerances to control internal leakage etc.
Manufacturers such as Linde would fit a spool to a specific bore under very close tolerances to control internal leakage etc.
Last edited: