Anthony Poole
Member
Have john Deere 310SG will not move fwd or rev. When lifted all 4 tires turn, you can stop by hand. All 4 speeds work, if you throttle up in neutral and push into gear either way speeds up for sec. Have checked fluid, good. All fuses and relays click. Park brake turns off. Have removed cover to fwd neu and rev solenoids. Checked for power to solenoids, fwd has power when in forward, neutral has no power in neu, reverse has power in rev, and neutral does as well. Checked power coming from shifter, the 4 wires 3 blue one white, the 3 have power each with fwd neu and rev selected. the other wires on split go to speed selector. So my question or part of it does the neutral go to another solenoid before it goes to neutral solenoid on trans? Also since neutral is never fully energized could this cause the neutral to be stuck allowing fluid to bypass?
Should I maybe run jumper to neutral to solenoid? Just my thoughts. Any suggestion would be great.
Should I maybe run jumper to neutral to solenoid? Just my thoughts. Any suggestion would be great.