Dan603
Active Member
I have a 1995 or 6 JCB 215 Series 2. There has been a problem with the ground/earth for instruments in the console prior to me owning the machine. I am the second owner. I recently replace the radio and found that it will turn over but not start now and I have some lights on the console illuminate that didn't before and are not prestart alarms. I think that the issue is a bad ground/earth. I checked the manual and each numbered wire to be certain that it was properly wired and it is. My manual does not show the grounds...
Does anyone know on the chassis where the ground wires for the console are attached?
Thanks.
Does anyone know on the chassis where the ground wires for the console are attached?
Thanks.