• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

JCB 1400B Warning Light Identification - Help!

Montana_Jeremy

Montana_Jeremy

Member
Joined
Oct 15, 2019
Messages
5
Location
Troy, MT 59935, USA
Anyone know what the right most warning light that is lit is supposed to be? I am thinking engine oil or trans pressure - but not sure. The only things I did recently were changed the oil and topped off the trans fluid - nothing else noteworthy other than overfilling both a bit. Trying to track down what happened. Thanks!
 

Attachments

  • 20220510_204524.jpg
    20220510_204524.jpg
    2.9 MB · Views: 15
G

GEOD998

Well-Known Member
Joined
Aug 11, 2014
Messages
45
Location
SW Pa.
and the other light is for the charging system. Make sure you didnt knock the wire off of the sending unit while changing the filter/removing the plug. the sending unit should be right infront of the filter on the engine block. Its there on my 87 1400B with 4.236 engine
 
You must log in or register to reply here.
Top