• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Ingersoll Rand roller drums

rollerman

rollerman

Active Member
Joined
Jan 15, 2014
Messages
26
Location
Brisbane
Occupation
mechanic
Can a pad foot drum from an IRSPF84 bolt straight into an IR SD150 Propac roller ?....thanks roger
 
B

Ben Witter

Senior Member
Joined
Apr 3, 2013
Messages
264
Location
On the outside
The short of it is no. They have entirely different hydraulic and drive systems. Even if you stripped the drums down I don't think the components would swap from one to the other. The drum weldments are different part numbers.
The easiest solution is to get a pad foot shell kit for your SD150.
 
rollerman

rollerman

Active Member
Joined
Jan 15, 2014
Messages
26
Location
Brisbane
Occupation
mechanic
Ben Witter said:
The short of it is no. They have entirely different hydraulic and drive systems. Even if you stripped the drums down I don't think the components would swap from one to the other. The drum weldments are different part numbers.
The easiest solution is to get a pad foot shell kit for your SD150.
Click to expand...
Thanks Ben, are you able to access parts books for these 2 models. If so, can you send the links to me..........rollerman
 
You must log in or register to reply here.
Top