• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

how to identify a case bucket.

9

92b16si

Well-Known Member
Joined
Jan 16, 2010
Messages
100
Location
mexico
how can I tell if a bucket is for a case or not? I mesured the pins, one is roughfly 5 inches in width the other is 10 inches. the distance from one pin to the other is roughtly about 14 inches. any markings i should look for?
 
N

nilzlofgren

Well-Known Member
Joined
Jan 30, 2007
Messages
121
Location
New Jersey
You Identify it just how you did. All factory Case buckets, and aftermarket buckets for a Case backhoe, have front pin ears about 10 inches apart, and rear pin ears about 5 inches apart. If you find a bucket with pin ears that are the same width apart, that bucket is for another brand of backhoe.
 
You must log in or register to reply here.
Top