• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

HMF/IMT with no functions

T

Tenwheeler

Senior Member
Joined
Dec 15, 2016
Messages
870
Location
Georgia
It is an HMF power to lift Type 1430-K3. Boom is marked INT 14/19 Series. No functions on the crane or winch work but the outriggers do. The control panel shows these fault codes at times. 1.8.0, 2.0.1, 2.0.2. 2.2.5 while holding green button. F5 high temperature light sometimes comes on for a short period, even when cold. Will not operate in override holding the red button. These codes are not in the operators manual. Anyone know anything about this and or have online service manual information? It,s on a tenwheeler and probably in the wrong place.
 
T

Tenwheeler

Senior Member
Joined
Dec 15, 2016
Messages
870
Location
Georgia
HMF power to lift is the crane unit made in Denmark. IMT ( Iowa Tool and Mold ) is North American distributor, to the best of my understanding. They give outstanding support. Had a real hair puller due to cross contamination with another system sharing the same fluid reservoir.
 
You must log in or register to reply here.
Top