1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Help with a Bomag BW211d-3

Discussion in 'Rollers' started by bean, Feb 17, 2011.

  1. bean

    bean Well-Known Member

    Joined:
    Dec 21, 2008
    Messages:
    124
    Location:
    Canada
    Anyone have a parts manual for a bomag211d-3. There is a small cartridge broken on the vibration hydraulic pump with no part number on it :(. There is no manual as it was purchased used.
     
  2. eric12

    eric12 Well-Known Member

    Joined:
    Feb 11, 2011
    Messages:
    236
    Location:
    new york
    call your local dealer, they should fax you a few pages with what they think your looking for. theyre out to make money and they cant sell you parts without you knowing what you need.
     
  3. bean

    bean Well-Known Member

    Joined:
    Dec 21, 2008
    Messages:
    124
    Location:
    Canada
    located the needed parts via my hydraulics dealer once I figured out which model of rexroth pump I had
     
  4. goran

    goran Member

    Joined:
    Sep 8, 2011
    Messages:
    7
    Location:
    quito
    help with bw211d-3

    Good morning,

    I have the same problem with our Roller. There is no Rexroth tag on vibration pump. have Bomag pn but it will cost a fortune to buy new pump using that. I would apreciatte it a lot Bean if you can help me with Rexroth pn you have. my mail is budzovan@gmail.com . Thank you very much , goran
     
  5. goran

    goran Member

    Joined:
    Sep 8, 2011
    Messages:
    7
    Location:
    quito
    Good morning,

    I have the same problem with our Roller. There is no Rexroth tag on vibration pump. have Bomag pn but it will cost a fortune to buy new pump using that. I would apreciatte it a lot Bean if you can help me with Rexroth pn you have. my mail is budzovan@gmail.com . Thank you very much , goran
     
  6. bean

    bean Well-Known Member

    Joined:
    Dec 21, 2008
    Messages:
    124
    Location:
    Canada
    The pump was a Rexroth A4V. I had to replace the Solenoid asy (coil/armature tube)

    It was about 80 bux and a week delivery. The entire control for the pump is about 1k.
     
  7. goran

    goran Member

    Joined:
    Sep 8, 2011
    Messages:
    7
    Location:
    quito
    Vibration pump Bomag

    Thank you. I was given this code A4VG56DA1DT3/32RPZC02F025S but i can not be shore about it and i would like to confirm it. the thing is we have bought the roller that was udsed before.Someone addapted Sauer Sundstrand pump that should not originally be there( was a quick solution for a 80 week problem i suppose:)) and does not work perfectly. Now i want to get originall as ,Sauer unit should be repared,but i am in problems to get the right pn. I have a manual, it should be this A4VG56 or smaller but there are so many option about the control and i do not want to risk buying it before i get pn right.I would apreciate you so much if you can check it and give to me, it would be a great relief. Best regards;
    Goran
     
  8. goran

    goran Member

    Joined:
    Sep 8, 2011
    Messages:
    7
    Location:
    quito
    I can give you a manual for the Hydraulic pump.( i have three pages scanned)

    Send me your mail or contact me budzovan@gmail.com
     
  9. bean

    bean Well-Known Member

    Joined:
    Dec 21, 2008
    Messages:
    124
    Location:
    Canada
    Sorry but thats all I know. I took a picture of my pump and sent it to my hydraulic repair depot and they came up with the A4V and parts.

    Only other number I have is Ident-NR 2052703 Sach-NR 05800928 FabrNR 6468381 which I am sure you have aswell.
     
  10. goran

    goran Member

    Joined:
    Sep 8, 2011
    Messages:
    7
    Location:
    quito

    If you still have a photos of the pump it would mean a lot if you can send me? I belive i can use that .my mail is budzovan@gmail.com. Please help me if you can.
     
  11. goran

    goran Member

    Joined:
    Sep 8, 2011
    Messages:
    7
    Location:
    quito
    It would mean a world to me if you can send me this photos. I have the photo of the unit i was offered and due to your photos i can compare it to be shore. I would apreciate it a lot.Goran
     
  12. goran

    goran Member

    Joined:
    Sep 8, 2011
    Messages:
    7
    Location:
    quito
    photos


    Hello once again,sorry to bother you, but...as it knows to happen i am desperate with this construction equipment.I have a friend who can decode the pump to rexroth but he needs more information, the old pump or the photos...i do not know who can help me other than you. We can share this exact part number,i will pass it to you if you help me with a photos and that will easy all your problems if you will need parts in the duture. Please help me if you can,best regards,Goran.
     
  13. ibleedyellow

    ibleedyellow Member

    Joined:
    Jan 25, 2012
    Messages:
    15
    Occupation:
    sales
    Location:
    Colorado
    post count
     
  14. ibleedyellow

    ibleedyellow Member

    Joined:
    Jan 25, 2012
    Messages:
    15
    Occupation:
    sales
    Location:
    Colorado