1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

grove sm4688xt scissor lift Help

Discussion in 'Forklifts/Telehandlers' started by Patriot_ent, Jan 2, 2020.

  1. Patriot_ent

    Patriot_ent New Member

    Jan 2, 2020
    Good afternoon everyone, this is my first post to the forum.
    I have a 1995grove sm4688xt scissor lift. the lift will not stop when the joystick is released. it doesn't matter if you and in drive mode, lift mode, forward, reverse, up, or down. it wont stop moving until you press the e-stop. i pulled the controller apart and replaced the switches attached to the joystick. This made no difference. If anyone can point me in the direction of a repair manual that isn't hundreds of dollars, or if anyone has any ideas or suggestions it is greatly appreciated. Thank you