1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Grove MZ90 Mainlift Tilt Sensor wiring

Discussion in 'Tool Carriers' started by Allen Jangula, Apr 21, 2019.

Tags:
  1. Allen Jangula

    Allen Jangula New Member

    Joined:
    Apr 21, 2019
    Messages:
    1
    Location:
    Montana
    Hi, Tilt sensor has all wires removed. Print shows 36 and 37 go to tilt sensor and a ground. Problem is, tilt sensor wires are red, black and green. 36 is power from ignition and 37 goes back to alarm horn. ( 37 is "-" from alarm)

    I would think, red would be +24 black be -24 (wire 37)from alarm horn and green to ground. No go.
    tried black to ground and green to 37. no go.

    They also painted over label on tilt sensor so no part number. Pretty sure it is a Fisher from searching internet. But I could not find a color code for wiring.

    Could use someone help on color code.

    Best regards
    Allen
     

    Attached Files: