semipro
Member
I made up a grade beam and fixed it with cleats so I could grab it just like I want and when it works can move alot of material, fast--but the [unintentional] in-curl on bucket and resulting pressure relief on thumb allow it to gradually creep inward resulting in bucket bottom scraping ground and beam up in the air [at about 5 feet in front of blade]...and I constantly have to re-adjust--DAMN!! Is it me/the controls...or what?
[The salesman said I may be able to install a cutoff valve on bucket curl function hose, but has to check with manufacturer].
[The salesman said I may be able to install a cutoff valve on bucket curl function hose, but has to check with manufacturer].