1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

genielift gs1930 jerky operation

Discussion in 'Other Compact Equipment' started by encantotom, Nov 28, 2020.

  1. encantotom

    encantotom New Member

    Nov 6, 2015
    i have an older gs1930. serial number 6996

    when using it, it becomes jerky in all mode. forward, backward, steering and up and down. i replaced the joystick and no difference.

    do you think it is the motor controller? how would i tell?


  2. Txhayseed

    Txhayseed Senior Member

    Dec 23, 2019
    Put a gauge on it and watch your hydraulic pressure. Easy way is to put a jack under it and jack up the drive wheels so you can use the control box and actually watch the gauge. Id check that first.