1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

genie z45/25 travel speed

Discussion in 'Other Construction/Demolition Equipment' started by dentdoc, May 20, 2022.

  1. dentdoc

    dentdoc New Member

    May 20, 2022
    Sprouses Corner, VA 23936, USA
    I have a Genie Z45/25. Low speed quit working. I assume that high speed is two wheel drive only. It is on a job and we can't get it on trailer to bring back to shop. What controls high/low speed?
  2. OFF

    OFF Senior Member

    Sep 30, 2009
    HD Mechanic
    Alberta, Canada
    well, those were pretty dependable old machines. I would be checking out the toggle switch in the basket to make sure it was still functioning.
    After that, the manual has some good troubleshooting procedures in it you could check out.