Pipevine
Well-Known Member
Can anyone tell me how to check the hydraulic oil and trans oil level on this machine?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Galion 104 series b questions
- Thread starter Pipevine
- Start date
RMXR
Active Member
Go here, scroll down and start reading:
http://www.steeringclutch.com/transmissiondiscsGALION.htm
http://www.steeringclutch.com/transmissiondiscsGALION.htm
Pipevine
Well-Known Member
Thank you very much
Pipevine
Well-Known Member
Does anyone have a good source for manuals or information on Cummins jnr100? Also is there a different name this engine is more commonly referred to as? I'm also needing to Source information on a seal kit for the injection pump. Thanks in advance.
Galion118c-ryan
Member
for my 118 assuming its similar i just remove the two little bolts on the filter housing on the top of the hydraulic tank and keep it over where the return is probs about 4 inch or so down from the top, for injection pump might be able to find out who made them and source from that point so instead of searching for cummins your searching for bosch for example and trans oil not 100% sure myself either