Has anyone ever worked on one. This one gos into limp mode. You start it and it shifts one time and stays in that gear until you shut it off and restart it. If you start it and manualy shift it it will go through the gears. I have tested the silionds and replaced the range selector and the speed sinsor.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Ford Torqshift
- Thread starter Old Doug
- Start date
mikebramel
Senior Member
What are the codes
There are no codes.
I drove it today starting out in towmode it shifted ok so i stopped and turned the TM off it shifted agin but it done some funny down shifting maybe i am geting some were or maybe it will burn to the ground and they will buy a truck i can fix.
First look I thought Doug was working on a " Select -O- speed " Ford tractor .
http://www.tractordata.com/farm-tractors/000/2/6/262-ford-4000-transmission.html
Sorry .. Carry on .
http://www.tractordata.com/farm-tractors/000/2/6/262-ford-4000-transmission.html
Sorry .. Carry on .
RZucker
Senior Member
Heh. I remember those.First look I thought Doug was working on a " Select -O- speed " Ford tractor .
http://www.tractordata.com/farm-tractors/000/2/6/262-ford-4000-transmission.html
Sorry .. Carry on .
I wish it was a select o speed i have worked on one before. I went to check the presser today and rememberd it has a pto in the way of the plug were you check it then i looked at it and found the pto uses the that port to run the pto. I dont know if it has any thing to do with it but the pto light flashes some times. So if i can i will unhook the line check the presser and plug it off and drive it some. The worst thing about a select o speed was alot of guys got run over thinging it was in park and geting off.
I put a presser gauge on it and found in park it gos to 50psi like it should but bouces down to high 30s then back up. But i havent found out what this means. Then in gear with brake on it gos up to close to 300 but never over like most do.