Dominion 410
Well-Known Member
Need to replace a tired Furukawa HCR-9E hydraulic rock drill. Has anyone got experience with a hydraulic rock drill mounted on an excavator?There are a few different manufacturers of these set-ups,just don't want to mention them on here.The added reach,above and below ground level would be a big advantage.When the drill was'nt needed,it could be removed and the bucket re-installed on the excavator.Not sure if going back to a dedicated crawler mounted rock drill is the way to go now.There are advantages/disadvantages to both set-ups,so any feedback appreciated.
Dominion:canada
Dominion:canada