Excavator Bucket, 24" Werk-Brau

[StumpyWally]

I have a 24"-wide heavy-duty trenching bucket for sale, Werk-Brau brand, like NEW, imperceptible wear, model 4MNHD24, with lift ring, bolt-on side cutters, & 5-Fabco 8340 Series cast teeth, total weight about 535 lbs, heaped capacity 9.2 cf. Pin-on hangers configured for New Holland 70 or 80, Kobelco 70 or 80, or similar, or for a pin coupler, & have the following dimensions:

• nominal stick & link pin diameter= 50 mm (1.969")
• bucket width at stick= 182 mm (7.165")
• bucket width at link= 182 mm (7.165")
• center-to-center pins= 290 mm (11.417")

$1,975

 

[StumpyWally]

I haven't had any replies on this since I posted it. And not much luck selling it locally. I'm thinking it must be the price.

What's a fair price for this...give me some opinions...

StumpyWally

 

[StumpyWally]

Reduced Price
While it isn't "eatin' any hay", I'm getting tired of looking at & moving this bucket around, so I'm reducing it's price to $1,200, or make me an offer.

While the bucket is designed to fit a Kobelco 70 or 80, or a New Holland 70 or 80, & could work with some pin-grabber style couplers, here are more pin-on compatibility options:

Fits with shims to width.
IHI 70Z
IHI 80NX
Komatsu PC 75R-2
Komatsu WB146-5,PS-5
Takeuchi TB 175

Fits with pin bushing & shims to width (may be slightly heavy)
Bobcat 337
Bobcat 341
Kobelco 35SR (probably)
Kobelco 45SR-2
Kobelco 50SR-3
Kobelco 55SRX (probably)
Komatsu WB140-2 Std or Ext Arm
Komatsu WB150-2 Std or Ext Arm
New Holland EH 35.B
New Holland EH 45
New Holland EH 50.B
Terex TX760
Terex TX860
Volvo EC50/W
Volvo ECR 58
Volvo MX 55/W
Volvo SE 50-3
Yanmar B50-2B
Yanmar VIO45-5
Yanmar VIO50-2
Yanmar VIO55-5

Fits with pin holes enlarged & shims to width.
Gehl GE803 (55mm pin)
Volvo ECR88 (60mm pin)

The mounting specs to support this info are shown here: View attachment 50mm Pin & 182mm Width.pdf

My complete listing of pin-on bucket mounting specs can be found in my thread at: https://www.heavyequipmentforums.com/showthread.php?28775-Pin-on-Bucket-Mounting-Specs

 

[StumpyWally]

I finally sold this bucket for $700 to a local equipment (Kobelco, Kubota, & miscell.) dealer. It was the only offer I ever had, hated to let it go so cheap, but it was doing me no good sitting around.