D7F fuel priming pump

[chuck767]

I have a D7F and when I purchased it it did not have the hand priming pump used to remove air in the system after changing a fuel filter. I was able to obtain one, but I don't see where it connects into the fuel system. Is there someone that can take some photos of a pump installed. Or a diagram showing how to hook it up.

Thanks,
Chuck

 

[Old Magnet]

For what tractor s/n, engine s/n and engine arrangement number?

 

[chuck767]

For what tractor s/n, engine s/n and engine arrangement number?

Let me get that info, thanks, Chuck

 

[chuck767]

the s/n is 92E995. The cat dealer said this number is for the machine and the engine.
Thanks,
Chuck

 

[Old Magnet]

OK, thought you might of had a later model with D3306 which has a bigger variety of pumps.

Most the D333c's use this configuration, pumps are common to the D333c and D330c and others.

Had a hard time finding a good picture, hope this helps.

 

[Bob/Ont]

That's a good common setup Pete. He can get and install that one.
Later Bob

 

[chuck767]

OK, thought you might of had a later model with D3306 which has a bigger variety of pumps.

Most the D333c's use this configuration, pumps are common to the D333c and D330c and others.

Had a hard time finding a good picture, hope this helps.

Thanks, This is a big help.
Regards,
Chuck