• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

D6R LGP Undercarrige Replacement

duchek

duchek

Member
Going to be replacing the tracks and rollers and idlers on our D6R over Xmas. Just wondering if anybody can point me in the right direction to find the torque specs. Also have a few other questions. Should we be using anti seize on all the bolts? If we do use anti seize then we have to adjust the torque specs not? Do most guys retorque everything after a day of running? The new pads are on the rails already so atleast we don’t have to do that. What’s the best way of actually threading the new tracks on? Thanks in advance for any replies.
 
T

td15c

Well-Known Member
idler bolts 390 +-50lb
Bottom roller 420 +- 60lb
Masterlink 300 +-50 then turn another 120 degrees
Sprocket bolts 130+- 30 then turn another 120 degrees minimum 280lb after turn.
 
T

td15c

Well-Known Member
I anti seize everything. Check torque on sprocket bolts after 3 or 4 hours then keep a close eye on them till your sure there not going to come loose. Also check masterlink after a day.
 
You must log in or register to reply here.
Top