• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

D6K2 drive spocket tighten procedure

Nige

Nige

Senior Member
Joined
Jun 22, 2011
Messages
29,565
Location
G..G..G..Granville.........!! Fetch your cloth.
I hope you're using all new hardware. This from the Service Manual - "Note: Do not reuse the sprocket hardware. The sprocket hardware has been stretched from the previous torque operation and can lead to premature loosening and hub damage. Always use new sprocket hardware and tighten to the required torque."

1. Lubricate bolts, nuts, washers with SAE30 oil. (not just the threads)
2. Torque bolts to 111 ± 15 lb ft starting from the centre of each segment and working to the ends.
3. Tighten bolts an additional 1/3 of a turn in the same sequence.
 
allen lafrance

allen lafrance

Well-Known Member
Joined
Aug 17, 2018
Messages
96
Location
Quebec,Montreal
Occupation
mechanic
Nige said:
I hope you're using all new hardware. This from the Service Manual - "Note: Do not reuse the sprocket hardware. The sprocket hardware has been stretched from the previous torque operation and can lead to premature loosening and hub damage. Always use new sprocket hardware and tighten to the required torque."

1. Lubricate bolts, nuts, washers with SAE30 oil. (not just the threads)
2. Torque bolts to 111 ± 15 lb ft starting from the centre of each segment and working to the ends.
3. Tighten bolts an additional 1/3 of a turn in the same sequence.
Click to expand...
Yes all news parts and bolt etc thanks for help
 
You must log in or register to reply here.
Top