• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

D37px-22

Rodney D37px

New Member
Joined
Nov 28, 2023
Messages
4
Location
Georgia
Surging , it doesn't surge in first or second but when you have verbal control on it will **** up and down when under a load , also when backing up if the machine is leaning to the right it will go left and vice versa. I have had the machine about 2 months 7,500 hours when I got it I changed all the fluids along with the final drive fluid ,it a as low.When not under a load it will sway right to left constantly but I can slap the shifter to the right when it tryst to go left and it will straight out
 

Rodney D37px

New Member
Joined
Nov 28, 2023
Messages
4
Location
Georgia
Update..... no surging anymore. But I tried another joystick and that was not the problem . When machine is cold reverse Is very slow until it gets warm. The more you use reverse the better it starts working. Could this be a A S valve or control valve?
 

Welder Dave

Senior Member
Joined
Oct 11, 2014
Messages
17,922
Location
Canada
It could depend on the temperature and weight of the oil. It's common for machines to be a little sluggish until the oil warms up.
 

Rodney D37px

New Member
Joined
Nov 28, 2023
Messages
4
Location
Georgia
I have absolutely no reverse now. The Transmission is not warming up above 25°C. I was throwing 3 Codes DLMOKX,DLM1KB and DLM2KB. So I replaced both speed sensors today didn't change anything. I have also replaced the HST filter and fluids. Before all of this I bought a used Palm shifter no difference so change it back to the original one.
 

Rodney D37px

New Member
Joined
Nov 28, 2023
Messages
4
Location
Georgia
When the weather was warm I had reverse but now that is cold I don't have anything. Can't get the transmission warm enough to make it work in reverse. Also I'm using T010 komatsu fluid and filters. I done a pump test forward it was good . It does great forward runs like a new one.
 
Last edited:
Top