• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Crane operator wages in your area

Bluwenis

Member
Joined
Jan 22, 2008
Messages
24
Location
Seattle
Seattle, WA
Wages for Local 302 through June 2010
the last contract was $9 over 3 years

Pension $7.55
Health $6.90
Training and Apprenticeship $.70

Union Dues $25 a month plus 2% of gross

$36.92
Cranes: Over 300 tons or 300' of boom
Cranes: Friction Over 200 tons

$36.36
Cranes: 200 tons to 300 tons, or 250' of boom
Cranes: Friction 100 tons through 199 tons
Tower crane over 175' in height, base to boom

$35.79
Cranes: 100 tons through 199 tons, or 150' of boom
Tower crane up to 175' in height base to boom

$35.24
Cranes: 45 tons through 99 tons

$34.75
Cranes: 20 tons through 44 tons

$34.33
Cranes: under 20 tons
 
Last edited:

Bluwenis

Member
Joined
Jan 22, 2008
Messages
24
Location
Seattle
You should see the breakdown for dirt equipment, wow! I'd rather see that than many other trades, where everyone is paid the same no matter what you do. 302 covers Alaska too, the rates might vary.
 

Lashlander

Senior Member
Joined
Jan 4, 2007
Messages
1,226
Location
Kodiak Ak.
So did they scrap the 4, 3, 2, 1, and 1A system? How about Tower Cranes? Where do they fall into the mix?

On edit, I went back and reread your post. I see you addressed Tower Cranes.
 
Last edited:

Bluwenis

Member
Joined
Jan 22, 2008
Messages
24
Location
Seattle
Its still similar. 4, 3, 2, 1, 1a, 1aa, 1aaa. Both tower scales were listed in the above post. They added another scale on top for friction and over 300 last contract
 

Lashlander

Senior Member
Joined
Jan 4, 2007
Messages
1,226
Location
Kodiak Ak.
If you work for an outfit that has several Cranes on a job and you spend time in each one do they keep track and bounce your pay all over the place?
 

Bluwenis

Member
Joined
Jan 22, 2008
Messages
24
Location
Seattle
The highest rate applies for the whole day. Usually a contractor won't change your scale at all. For example, I usually operate a tower, but if I go run a forklift or elevator for a few weeks between cranes I still get paid my tower scale. I think its a lot of work for payroll to change your pay rate all the time.
 

Lashlander

Senior Member
Joined
Jan 4, 2007
Messages
1,226
Location
Kodiak Ak.
Thats what I was thinking, It would cost more to track all the hours than to just pay the top rate for what you operate.
 

mikef87

Senior Member
Joined
Aug 22, 2007
Messages
433
Location
waltham
Occupation
owner/operator/mechanic/laborer/truck driver
We get paid by the boom length here, and an extra $5 an hour if you have a pile driving hammer on.

150 feet-$1.91
185 feet-$3.36
210 feet-$4.72
250 feet-$7.15
295 feet-$9.91
350 feet-$11.53

Guaranteed 40 hours-$36.86

Broken time $42.73 all overtime is double time
 

insleyboy

Well-Known Member
Joined
Jun 24, 2008
Messages
191
Location
Monroe Michigan
Occupation
Operator 25 years, was laborer for 7 years
Pile drivers are decreased here. Criminal if you ask me!

Base crane pay..36.58 400 ft, plus

It breaks down from there but not a lot

pension.....6.95

vacation....5.49

Good pay, good hours, we are lucky!
 
Top