1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Convert 5hose planers and wheel saws to 3hose

Discussion in 'Compact Equipment Attachments' started by heymccall, Sep 25, 2019.

  1. heymccall

    heymccall Senior Member

    Joined:
    Feb 20, 2007
    Messages:
    1,951
    Location:
    Monroeville, Pa
    Putting new cat 262d3 in fleet.
    Have 3 planers and 4 saw wheels from case 1845C.
    Years ago, changed manifolds on 2 to run on 3 hose Cat 248B. Put custom harness in 248B.

    I'd like to source manifolds for less than the $2600 each from Woods/ Alitec. Anyone have a source?
     
  2. heymccall

    heymccall Senior Member

    Joined:
    Feb 20, 2007
    Messages:
    1,951
    Location:
    Monroeville, Pa
    Anybody?
     
  3. KSSS

    KSSS Senior Member

    Joined:
    Feb 27, 2005
    Messages:
    2,997
    Occupation:
    excavation
    Location:
    Idaho
    Are those manifolds proprietary? I would think you could contact the oem of the components and see if they can help you out. I would think Alitec sourced off the shelf components as they don't built those themselves, but I am not familiar with them. I have a Coneqtec wheel saw that is high flow 3 hose.
     
  4. heymccall

    heymccall Senior Member

    Joined:
    Feb 20, 2007
    Messages:
    1,951
    Location:
    Monroeville, Pa
    Just got in a Bobcat 3hose setup manifold for just under $1800.
    Cheapest one I could find.
     
  5. heymccall

    heymccall Senior Member

    Joined:
    Feb 20, 2007
    Messages:
    1,951
    Location:
    Monroeville, Pa
    And Woods bought Alitec years ago, and, after the non compete ran out,the Alitec founders started Roadhog.
     
  6. KSSS

    KSSS Senior Member

    Joined:
    Feb 27, 2005
    Messages:
    2,997
    Occupation:
    excavation
    Location:
    Idaho
    Good to know.