I'm working on a cat cb534d roller serial number Eaa625 travel issue. I'm getting a flash code 14 which If I'm correct relates to the fwd edc solenoid. The solenoid is new and still getting the code. Does anyone have any troubleshooting info or advice? I have found a few schematics but not sure if they are for this machine.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Cb534d
- Thread starter Jackie j
- Start date
Nige
Senior Member
You are correct in that the Diagnostic Code relates to forward propel solenoid. The solenoid is not detected, or is shorted to battery or ground. Possible causes for this fault include:
Open circuit
Short to battery
Short to ground
Faulty coil
Poor connection
I'll drop you a message that you can reply to so that I can forward you a copy of the complete diagnostic procedure for this fault.
Open circuit
Short to battery
Short to ground
Faulty coil
Poor connection
I'll drop you a message that you can reply to so that I can forward you a copy of the complete diagnostic procedure for this fault.
Nige
Senior Member
It should have arrived in the inbox of whatever email address you used to register on here.