Baltoi Ionut
Member
Hello everyone, I came back with a new problem with this device.
The problem is the following, for a week I have been having problems changing gears.
The problem manifests itself in the following sense:
-I have the transmission in second gear, I turn the reverse to the forward position, and I take my foot off the brake pedal, the device does nothing stand still
I accelerate the engine in the hope that it will move forward but nothing, I move the inverter to the neutral position and then the audible alarm starts to appear on board
I try this with every speed but nothing, I try to turn the inverter and in the reverse position, the reverse alarm works when I do this but it does not move
It is worth mentioning that when I move the second-speed inverter to the forward position on board, it still shows me that I am in neutral.
Another thing since I bought it is the number one speed, which when I put the inverter in the forward position would have wanted to move very little forward, or a small jerk could be heard, but it did nothing
Another thing to mention is that the battery is a little weak now due to low temperatures but the engine starts, can this be a reason?
The previous owner said he changed the oil and filter to the hydraulics, what could be the cause?
What I can say is that I try to use the diagnostic method by turning the key, I get a few error codes, but none of them are active, because after I turn off the device and turn it on again, the audible alarm does not start until I try again. I move forward or backward with him
The problem is the following, for a week I have been having problems changing gears.
The problem manifests itself in the following sense:
-I have the transmission in second gear, I turn the reverse to the forward position, and I take my foot off the brake pedal, the device does nothing stand still
I accelerate the engine in the hope that it will move forward but nothing, I move the inverter to the neutral position and then the audible alarm starts to appear on board
I try this with every speed but nothing, I try to turn the inverter and in the reverse position, the reverse alarm works when I do this but it does not move
It is worth mentioning that when I move the second-speed inverter to the forward position on board, it still shows me that I am in neutral.
Another thing since I bought it is the number one speed, which when I put the inverter in the forward position would have wanted to move very little forward, or a small jerk could be heard, but it did nothing
Another thing to mention is that the battery is a little weak now due to low temperatures but the engine starts, can this be a reason?
The previous owner said he changed the oil and filter to the hydraulics, what could be the cause?
What I can say is that I try to use the diagnostic method by turning the key, I get a few error codes, but none of them are active, because after I turn off the device and turn it on again, the audible alarm does not start until I try again. I move forward or backward with him