1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

CAT ECM AND PERKINS

Discussion in 'Generators/Gensets' started by alaa, Sep 14, 2017.

  1. alaa

    alaa Well-Known Member

    Joined:
    Jan 31, 2017
    Messages:
    48
    Location:
    kasa
    Hi,
    I want asking about the main different between both ECM (ADEM4) related to the flash file.
    Thanks All
     
  2. alaa

    alaa Well-Known Member

    Joined:
    Jan 31, 2017
    Messages:
    48
    Location:
    kasa
    My feeling says there are no buddy understood my question
    I will try to make it easier
    if the ECM support ata data and you want to replace the software by j1939 so it will work with monitor system that support j1939
    is there any relation between the flash and the ECM designed