landworksTN
Active Member
We have constant fire going to the ac compressor whether the switch it turned off or on. Just wondering if it could be a stuck relay and where that relay could be located on an 08 cat d6k? Thanks guys for any info.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Cat d6k ac relay?
- Thread starter landworksTN
- Start date
nowing75
Senior Member
What's your email and an I can send the wire diagram. Can't Remer off hand where it's at
landworksTN
Active Member
davidguy01@hotmail.com
Thank you so much! A wiring diagram would help so much. I think we are having some wiring issues any way. The engine was replaced right before we bought the machine and I think we have some things that aren't right.
Thank you so much! A wiring diagram would help so much. I think we are having some wiring issues any way. The engine was replaced right before we bought the machine and I think we have some things that aren't right.
landworksTN
Active Member
Got in touch with a cat rep today and they said the ac is supposed to have constant fire and the ground side breaks instead of the positive side. So i have no idea.
nowing75
Senior Member
Did you jumper the relay. Are you getting power at the relay
landworksTN
Active Member
Well we finally got it figured out. We replaced everything in the ac system. Which most of it needed to be. Turns out that the problem was that everything was plugged up wrong from where the engine had just been replaced. Also found out that all the points where the harness should have been bolted down that they didn't bother doing that either. But now we are back in business. Thanks for the help guys!
nowing75
Senior Member
Good to here