Nige
Senior Member
Mark’s right. The pinouts I posted above will work on an ADEM-II engine ECM plus on most machine ECMs from that same era because they also had the same pinouts as the ADEM-II engine ECM. For example from the schematic of your D5M the machine ECM has exactly the same pinouts as an ADEM-II including both the Cat & ATA Datalinks.
If you have a S/N for the C12 or even just the prefix then please post it up. The correct pinouts can be identified from the electrical schematic.
If you have a S/N for the C12 or even just the prefix then please post it up. The correct pinouts can be identified from the electrical schematic.