51U06523An Operation & Maintenance Manual should be your first port of call. What’s the machine Serial Number.?
It might be a trick of the photo but it looks like there is a load of slop in the swing bearing.
Crawl underneath the carbody and look up.........How would one go about finding the other end of this hose?
Yeah, it turns over just fine..just won't start. I was watching a video earlier and saw someone take out the air filter and shoot some starting fluid in. It started for them, so I was going to try that tomorrow.I think you mean start not turn over. Turn over would indicate a starter issue where the engine won't turn. Are you getting smoke when trying to start it and do you have the throttle set to maximum? If it does start quickly move the throttle to low idle. If you're getting smoke you could try a tiny shot of starting fluid. Sometimes that's all it takes but only a tiny shot or 2. If that doesn't work don't keep trying starting fluid. You'll need to do more hand priming of the fuel system and/or loosening the fuel lines at the injectors. You have to be careful loosening the lines at the injectors and may need 2 wrenches so nothing gets twisted.