1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

case cx 210 sn DAC212267 WONT START

Discussion in 'Test Forum' started by J.Hunt62, Apr 1, 2020.

Thread Status:
Not open for further replies.
  1. J.Hunt62

    J.Hunt62 Member

    Joined:
    Apr 1, 2020
    Messages:
    9
    Occupation:
    heavy equipment field mechanic
    Location:
    Sparta, TN
    ENGINE TURNS OVER BUT WONT START. THERE IS NO POWER AT FUEL LIFT PUMP. WOULD LIKE TO KNOW WHERE FUEL LIFT PUMP RELAY IS LOCATED. I PUT POWER TO FUEL LIFT PUMP MAKES 9 PSI BUT ENGIN STILL WONT START. UNPLUGED HARNES AT INJECTION PUMP AND PLUGED IN A TEST HARNES FOR A 5.9 CUMMINS AND ENGINE WILL RUN. ALL FUSES ARE GOOD . NEED INFORMATION ON HOW TO TROUBLESHOOT THIS ONE.
     
Thread Status:
Not open for further replies.