About a month ago I bought a Case 650k that has been sitting for about 4 years. After numerous trips to the dozer, I did get it to crank and the hydraulics to function, but I can not get it to move. I finally removed the left joystick (F/N/R and steering) and it seems that something has eaten the connector between the joystick and the main wire harness. The 6 wires are not color matched and the connector is gone. If anybody could help me connecting these wires I would greatly appreciate it. Thanks.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Case 650k wiring problem
- Thread starter 92JD450
- Start date
Coy Lancaster
Senior Member
Do you have a service manual?
Coy Lancaster
Senior Member
In the electrical section of the service manual the connectors are listed by number such as X21 or what ever. It also has the electrical schematic you can find your connector there and then find the pin location.