Judd Shearer
New Member
Does anyone out there know a low cost drive motor replacement for a CASE 1816. If the motor suggested is a key shaft please let me know what the sprocket would be also.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Case 1816 Aftermarket Drive Motor and Sprocket
- Thread starter Judd Shearer
- Start date
Your best bet would be to take the motor off, and measure what you need, also get the system pressure and flow rate. Then take these figures to someplace like surpluscenter.com. and see if they have a motor with the same specs...
Or take your motor to a local hydraulic motor rebuilder, and see if it can be rebuilt...
Or take your motor to a local hydraulic motor rebuilder, and see if it can be rebuilt...
Judd Shearer
New Member
Thank you DIYDAVE
Welder Dave
Senior Member
Check with Loader Parts Source. I got a motor from them for about $800 less than the dealer wanted. So far no problems at all. If you need a new motor, you will want to drain and thoroughly filter your hyd. oil.
https://www.loaderpartssource.com/
https://www.loaderpartssource.com/
Judd Shearer
New Member
Welder Dave, Thank you I will check them out.