• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Carraro transmission slipping

D

Danny20

Member
Joined
Jan 2, 2020
Messages
6
Location
Shawnee Ok
We have several Case 586G and 588G rough terrain forklifts and several of them tend to slip a little when you go from neutral to forward or reverse. After they engage its fine until you go to neutral and back into gear. We have changed the circlips on them which helped some but not all of the lifts. Are there other problems that could cause this?
 
T

tractormech

Senior Member
Joined
Feb 19, 2015
Messages
349
Location
florida
Are they older units? If there's some wear in the front pump and some extra clearance in the clutch packs it will not be crisp when you put it in gear. You said they slip-if you shift and wait 3 or 4 seconds and apply throttle is the slip issue gone? Is it better or worse when it warms up?
 
You must log in or register to reply here.
Top